Categories
Brands
Information
Shopping Cart
Specials
Bestsellers
Sony Vaio VGN-CR590 Series CD DVD RW DL Drive Burner
 Click to enlarge |
|
| Sony Vaio VGN-CR590 Series CD DVD RW DL Drive Burner Specifications | |
|---|---|
| Product Type | CD DVD±RW R DL Drive/Burner/Rewriter |
| Condition | 100% Brand New |
| Enclosure Type | Internal |
| Width | 128mm |
| Depth | 127mm |
| Weight | 0.27KG |
Brand New Internal DVD±R/RW (Dual Layer) Drive/Burner/Re-writer for
Sony Vaio VGN-CR590 Series Laptop
Description :
Enhance your notebook/laptop computer capabilities with this Super-Multi Notebook DVD DL Drive/Burner/Rewriter . Write and rewrite at a 24x max CD burn speed, and write DVD±R discs at 8x. This burner writes to DVD±R while double layer DVD-R (8.5GB) recording is also supported. Burn fast , Burn Right with this burner.
Key Features :
>>Max 8x DVD read/write
>>Multi-Format: DVD+/-R, DVD+R/-R DL, DVD+/-RW, DVD-RAM and DVD-ROM
>>Buffer Under Run Protection
Technical specifications :
| Optical Storage | |
| Type | DVD±RW R DL Drive (Burner, Rewriter) |
| Maximum Read Speed | 8x DVD/24x CD |
| Maximum Write Speed | 8x DVD/24x CD |
| Maximum Rewrite Speed | 8x DVD/24x CD |
| Supported Media Types | CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM ,DVD MULTI Read /Write support, DMA66 support |
| Media Load Type | Tray - Loading |
| Access Time | 140 ms (DVD), 125 ms (CD) |
| Buffer Underrun Protection | Yes |
| Buffer Size | 2MB |
| Software / System Requirements | |
| OS Required | Windows 2000, Windows XP Home Edition, Windows XP /Vista Windows 7 Professional later |
| Warranty | |
| Service & Support | 12 months warranty |
| Packing | |
| Packing included | 1x BARE DVD±RW DRIVE |
NOTE:
This is Bare dvd drive only . Some laptop may use original faceplate(bezel) and some mounting frames or a caddy around the bare CD drive for easy swap.
You need to re-use the mounting frames or caddy in order to use this new drive. Some laptop may also use a rear connector adapter to change the position and shape of the rear connector. If your original CD drive rear connector looks different from this drive, it most likely has a special rear connector adapter added to the drive. In this case, you just need to remove the rear connector adapter from original drive and re-use it on the new drive.
It's easy. First, use a straightened paper clip or something similar to open the tray (there's a small hole in the drive front for that purpose). Slide the tray front up and off (you can see how it's constructed by looking at the replacement tray front). Slide the new front on until it snaps into place. Then close the tray.
The drive faceplate is held by catches at three points: each side and either the top or bottom. Use a screwdriver or something similar to push the catches in one at a time, and pull the faceplate off the drive a little at each point until it's completely released and can easily be lifted off the drive. Then attach the new faceplate, snapping it into place at all three points.
AND
Read more:
1. How to Install a DVD-ROM Burner to a Laptop.
2. How to replace the Optical Disc Drive.(Toshiba Laptop)
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Click to enlarge
Click to enlarge
Click to enlarge